b'BALL / EASY START / METERING / NEEDLE / RELIEF / SOLENOID VALVESTrue Union Ball Valves - PVC F X F Fuel Solenoid Valves- 300 PSI max. pressure, 1/8" Female inlet- Mounts to fuel unit. Use with any fuel unit rated - 225 PSI @ 70 F up to 16 gph, suitable for no.2, no.1 fuel oil, or - Viton seals kerosene- Body colors: R642N (Grey), R753N (Black), R261N (Green)PART # DESCRIPTION EACH PART # DESCRIPTION EACHC03-00133-V3/4 F x F - Includes threaded and slip unions127.50 F04-00974 115V Fuel Solenoid Valve - #R642N 64.20C03-00126-V 1 1/2 F x F - Includes threaded and slip unions252.00 F04-00978 230V Fuel Solenoid Valve - #R753N 64.10F04-00979 12VDC/24VAC Fuel Solenoid Valve - #R261N 67.60V13-00653 115V Solenoid Coil - #3713824 14.50Metering Valve - Brass V13-00654 230V Solenoid Coil - #3713798 14.10- 4000 PSI max. pressure V13-00664 12VDC/24VAC Solenoid Coil - #3713823 23.10- 1/4 F x F- 300 F- Molded plastic easy grip 4-lobe handKunkle Safety Relief Valve - Bronzewheel- Buna-N seals - Steam to 250 PSI - 406 F, Air/Gas to Panel mountable: 5/8 hole required 300 PSI - 300 FPART # DESCRIPTION EACH - Factory set @ 175 PSI - steam- 1/2" M x 3/4" side outletC03-00320Metering Valve - #7320P94.50PART # DESCRIPTION EACHC03-00513 Relief Valve - #6010DC-01-LM0175 223.40Needle Valve - Brass- 3000 PSI max. pressure- 1/4 F x F Pressure Relief Valves- 160 F- Round, aluminum control knob- Needle is 416 SS - 10 GPM flow rate- Buna-N seals - 160 F, Adjustable- Locking set screw on control knobPART # DESCRIPTION EACHPART # DESCRIPTION EACHC03-00536 1200 PSI max. pressure - 1/4" M inlet (22550A) 21.20C03-00310-2Needle Valve - #JN276.80C03-00537 2400 PSI max. pressure - 3/8" M inlet (22531A) 21.20C03-00538 3600 PSI max. pressure - 3/8" M inlet (22532A) 21.2008 Oil Solenoid Valve C03-00539 5000 PSI max. pressure - 3/8" M inlet (22533A) 21.20C03-00541 3600 PSI max. pressure - 1/4 M inlet (22565A) 21.20- 150 PSI max. pressure, 1/8" F x F, 125 F- 1/8" Orifice, Lead wire - 36" long, Magnetic valve Easy Start ValvePART # DESCRIPTION EACH - 8 GPM, 5000 PSI max. pressure, 195 FF04-00975 120V Oil Solenoid Valve130.10 - 3/8" MNPT x Straight, 1/4 Barb- SS ball, seat, & spring- To be used on the cold water side of Kip Oil Solenoid Valve pumpPART # DESCRIPTION EACH- 300 PSI max. operating pressure differential C09-00008Easy Start Valve21.60SECTION 8- 1/8" F x F, 1/16" Orifice = 6 watts- Brass body, Lead wire = 20 AWG, 24" longPART # DESCRIPTION EACHF04-0097212VDC Oil Solenoid Valve 189.70 F04-00961 120V Oil Solenoid Valve 155.0052'