b'BALL VALVE / FLOAT VALVES & PARTSFloat Valve Float Ball- 85 PSI max. pressure- 180 F - Square shaped plastic float ball- Brass body - For use with C03-00630 1/2 Float - Brass arm w/o rod and ball valve.- Adjustable float arm- Robert Mfg. "Bob " seriesPART # DESCRIPTION EACHPART # DESCRIPTION EACH C03-00630-02 Float Ball 12.50C03-00627 Valve - R400-1 - 68.5 GPM flow rate - 1"M x 1"M 139.40C03-00640 Valve - R400-3/4 - 39.9 GPM flow rate - 3/4"M x 3/4"M 88.60C03-00642 Ball - R400-1, R400-3/4 55.70 Float BallThreaded Rod - Half-moon shaped plastic float ball with bolt hole- 1/4 x 20 UNC x 3 - Use with C03-00629 1/2 Float valve.- Zinc plated steel - Was used with C03-00635 3/8 Float valve which is no longer available.PART # DESCRIPTION EACHAR14-00300 Threaded Rod 1.20 PART # DESCRIPTION EACHC03-00628 Float Ball 14.90Float Tank Plastic Suction Restrictor- Plug only - not drilled: drill to size required after plug is insertedFloat Ballor the hole could become distorted.- Restrictor - drilled to size listed: Plug is inserted into a pipe nipple and drilled. - Round plastic float ball - 6" OD- Use with C03-00627 1" Float valve.- Restrictors are required to create vacuum. - Use with C03-00640 3/4" Float valve.PART # DESCRIPTION EACHC03-00642 Float Ball 55.70Float Ball Kit08PART # DESCRIPTION EACH - Round plastic float ball with rodE09-00002-P Plastic Plug 1/4 M (Drill to size after inserted.) 0.80 - Threaded rod - 1/4 x 20 UNC x 2 5/8- Use on a variety of unitsE09-00003-P Plastic Plug 3/8 M (Drill to size after inserted.) 0.70412-10541 Plastic Restrictor 1/2 M (Drilled to 5/16 orf.) 6.70645-10542 Plastic Restrictor 1/2 M (Drilled to 9/32 orf.) 6.70 PART # DESCRIPTION EACH4120-10540 Plastic Restrictor 1/2 M (Drilled to 11/32 orf.) 6.70 C03-99622 Float Ball Kit 4.904108-10553 Plastic Restrictor 1/2 M (Drilled to 21/64 orf.) 6.705181-10548 Plastic Restrictor 1/2 M (Drilled to 23/64 orf.) 6.70 Ball Valve - Brass F X M (1-Way)5182-10547 Plastic Restrictor 1/2 M (Drilled to 25/64 orf.) 6.70120-10506 Plastic Restrictor 1/2 M (Drilled to 1/4 orf.) 6.70 - 500 PSI max. pressure- 180 F SECTION 8518X-10548 Plastic Restrictor 1/2 M (Drilled to 3/8 orf.) 6.70 - Buna-N seals- Machined seats & seals allow for bubble tight sealing of gases & liquidsPART # DESCRIPTION EACHC03-00120 1/4 F x M 13.0049'